不锈钢工艺（Stainless steel technology）.doc

不锈钢工艺（Stainless steel technology） The surface of the stainless steel surface processing technology of stainless steel processing technology of the stainless steel surface processing technology of the stainless steel surface processing technology ((((2222)))) this is a kind of metal removal process, in the process of stainless steel as anode in the electrolyte, the metal from the surface to remove after the power supply. The process is usually used for parts processing because their shape is difficult to polish with traditional methods. The process is often used for cold-rolled steel plate surface, because its surface is smoother than that of hot rolled steel. However, the electrolytic polishing will make the surface impurities more obvious, especially the titanium and niobium stabilized materials will cause the weld area to be different due to granular impurities. Small weld scars and ridges can be removed by the process. The process focuses on the surface of the protruding parts and dissolves them first. The electrolytic polishing process is to immerse the stainless steel in the heated liquid, which involves many proprietary technologies and patented technologies. The electrolytic polishing of austenitic stainless steel is very good. There are many kinds of patterns that can be applied to the surface processing stainless steel. Make the steel plate possesses the advantages of adding pattern or textured surface processing is as follows: (1) to reduce metal roofing material shrinkage (oilcan - ning), the word is a term used to describe the brightness on the surface of the material, the surface from the optical point of view. For example: large area of decorative plate, even after stretch straightening or tensioning is difficult to make the surface completely flat, so the metal roofing material corrugated. The mesh pattern can reduce glare from the sun. The pattern plate is not obvious if there are slight scratches and small area indentation. The strength of the stee