住宅建筑设计规范（Residential building design specification）.doc

住宅建筑设计规范（Residential building design specification） Article 1.0.5 residential building design shall be mainly used in the near future, and may be considered in the future. Article 1.0.6 the number of floors of the house shall meet the following provisions: A low-rise residence is one to three floors; Ii. The multi-storey residence is four to six floors; The upper and middle floors are seven to nine floors; 4. The high-rise residence is 10 to 30 floors. Article 1.0.7 in addition to the implementation of this specification, a residential building design shall conform to the existing requirements of the relevant standards and norms of the state. Chapter ii interior design Section 1 set Article 2.1.2 the residence shall be designed according to the set type. Each set must be unique, and should have bedroom, kitchen, toilet and storage space. Article 2.1.2 the residential type shall be divided into small sets, middle sets and large sets, and its usable area shall not be less than the following: the small set of 18m2; Medium a 30 m2; Large set of 45 m2. Section 2 bedrooms, living rooms and passing rooms Article 2.2.1 the bedroom should not be colluded with one another, and the area should not be less than the following: the two bedrooms, 9m2; Single bedroom 5m2; And living room 12m2. Article 2.2.2 the bedroom shall have direct lighting and natural ventilation. When through the corridor and other indirect lighting, should meet the requirements of ventilation, security and privacy. Article 2.2.3 the living room shall have direct lighting and natural ventilation, and its area shall not be less than 10m2. Article 2.2.4 the room shall be used indirectly, and the area shall not be less than 5m2. Section 3 kitchen Article 2.3.1 the kitchen area shall meet the following requirements: 1. The kitchen shall not be less than 3.50 m2 for the use of pipeline gas and liquefied petroleum gas for fuel; Second, the kitchen with coal as fuel should not be less than 4m2; The kitchen with coa