动静压磨头安装调试工艺规程（Installation and commissioning procedure of static pressure grinding head）.doc

动静压磨头安装调试工艺规程（Installation and commissioning procedure of static pressure grinding head） Installation and commissioning procedure of static pressure grinding head Tags: procedures, processes, movement, grinding head, debugging Of dynamic and static pressure grinding head installation procedure summary: unpacking check whether there is any damage on components observed during transport on machine tools note jacket refueling process not impact of machine tool spindle pump station with spindle half liter standard gas must be three layers of silk filtering note must spindle cannot replace the pump motor access machine tools main switch always switch station whether motor work inspection station to 2002: machine tools, the wto is a challenge but also opportunity experts point out that to strengthen research and development of CNC machine tools in our country to speed up the development of the popular type segment in the machine tool talk at random service competition in the machine tool manufacturing industry in China the status quo of Chinese milling machine and machining center market development direction and prospect of the technology level of domestic and international lathe and machining center production, demand and development trend of world machine tool numerical control system development trend of world development trend at home and abroad and machining technology and the development of numerical control machine tool 1 unpacking check all parts and components, observe any damage in transit. 2 puts the grinding head on the machine tool, and notice that in the process of attaching the machine to the machine, do not crash the spindle of the machine tool. 3 add 2 # main shaft oil from the filling port of the pumping station to about 80 liters to the oil target, and it must be filtered by three layers of silk cloth when refueling. Note: be sure to use 2 # spindle oil instead of other. 4 pump station motor is connected to the total switch of machine tool, th