前起落架防撞柱.doc

Tools Equipment 工具和设备： P/N 件号 QTY 数量 DESIGNATION 名称 REMARK 备注 1 PF55451-1 1 Cart -Servicing,Landing Gear Shock Strut Oil 勤务车，起落架减震支柱滑油 COM-1532;or/或为PF55451-23,PF53481-9P,1104 2 F70200-1 1 Tool -Strut Inflation, Landing Gear 起落架减震支柱充气工具 SPL-1521 3 J32060-1 1 Valve -Drain, landing gear shock strut oil 排放活门，起落架减震支柱滑油 SPL-1829,Or/或为A32066-1 4 No specific 无特别规定 1 Hose -Flexible 柔性软管 STD-1103; 5/8 inch ID, Oil or Hydraulic Fluid Resistant,6 ft 内径5/8英寸，耐滑油和液压油，6英尺长 5 No specific 无特别规定 1 Container 容器 STD-1110;Hydraulic Fluid Resistant,5 Gallon (19 Liters) 耐液压油，5加仑(19升) 6 No specific 无特别规定P/N 件号 1QTY 数量 Gage -Pressure 压力表DESIGNATION 名称 STD-1157;0-3000 PSIG (0-20685 KPa)REMARK 备注 Parts Material 部件和航材： P/N 件号 QTY 数量 DESIGNATION 名称 REMARK 备注 1 BMS3-32TY2 AS REQ 按需 Fluid - Landing Gear Shock Strut 起落架减速震支柱液压油 D00467 2 A-A-59503,Type I,Grade BP/N 件号 AS REQ 按需QTY 数量 Nitrogen 氮气DESIGNATION 名称 G00018,Gaseous,pressurizing,99.5 percent pure 气态、增压，纯度99.5%(ALTERNATIVE(备选):BB-A-1034(G02314)Air-Compressed(压缩空气))REMARK 备注 Work Content 工作内容： NOTE: Perform the task card 38M1215006-1 within 5-10 flight cycles after completed this task card. 注： 在执行完本工卡后的5-10个飞行循环内执行工卡38M1215006-1。 Service the nose landing gear shock strut.前起落架减震支柱勤务。 TASK 12-15-41-610-802 Nose Landing Gear Shock Strut Servicing (Fig.30ure 1) 前起落架减震支柱勤务(图301) Prepare to Do the Servicing of the Shock Strut减震支柱勤务准备 WARNING: MAKE SURE THAT DOWNLOCK PINS ARE INSTALLED IN ALL THE LANDING GEAR.WITHOUT THE DOWNLOCK PINS, THE LANDING GEAR CAN RETRACT AND CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT. 警告： 确保所有起落架上已经安装放下锁销。否则，起落架可能会收上并伤害人员、损坏设备。 If the downlock pins are not installed in the nose and main landing gear, do this task: ______ XXXXX Landing Gear Downlock Pins Installation (AMM TASK 32-00-01-480-801 p201).如果前和主起落架上没有安装放下锁销，进行工作：起落架放下锁销安装(AMM TASK 32-00-01-480-801 p201)。 WARNING: MAKE SURE THAT PERSONNEL AND EQUIPMENT ARE AWAY FROM THE