P6KE系列续流二极管.pdfVIP

P6KE SERIES GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ! Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-15 ! Glass passivated chip junction in DO-15 package ! 600W surge capability at 1ms ! Excellent clamping capability ! Low zener impedance ! Fast response time: typically less than 1.0 ps from 0 volts to BV min ! Typical I μ R less than 1 A above 10V ! High temperature soldering guaranteed: 260℃/10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-15 molded plastic Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.015 ounce, 0.4 gram DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types P6KE6.8 thru types P6KE440 Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL VALUE UNITS Peak Power Dissipation at T =25℃, T =1ms(Note 1) PPK Minimum 600 Watts A P Steady State Power Dissipation at T =75℃Lead PD 5.0 Watts