理想速印机故障（Ideal printer fault）.doc

理想速印机故障（Ideal printer fault） Fault category, fault number Description A01 201 when the pulse motor is started, the paper is positioned, the paper is cut or the paper is loaded, the paper positioning sensor is still unable to switch to the starting state. A01 202, in the process of paper positioning or the beginning of the operation of the plate, the write pulse motor has begun to reverse rotation, the plate positioning sensor still failed to switch to a closed state. A01 206 occurs overtime faults during plate making operations. A01 211 in machine standby mode, the paper position sensor is in the start-up state. A01 214 when the machine starts to make the plate, the paper position sensor is the starting state. A01 215 writes the gate array of the pulse motor improperly (the motor does not stop within the set time). A02 509 version of the paper loading operation, when the printing roller rotates to a verification angle, the test paper exists on the printing cylinder, the paper loading sensor is closed. A04 303, when the print release card sensor is tested at the cylinder angle of 120 degrees and 180 degrees, it is closed. A04 314 release plate fault. A05 304 when the unloading operation is completed, the print release card sensor is in the start-up state. A05 312 when the plate making action begins, the print release card sensor is started. When the A05 315 is placed in the machine in the release plate, the print release card sensor is in the start-up state. A06 403 feed tray upper limit lower limit, safety switch is off state. A07 409, when the paper should reach the paper discharge sensor, it is still closed, and when the machine stops (empty paper), the paper sensor is shielded. A07 412 when the machine detects the empty delivery of the paper, and the paper sensor continues to rotate in the printing cylinder, the three turn is still in the conduction state. A07 413 when the paper sensor does not have paper, the paper sensor is detected as occlusion. (paper is too