两台tp-link 340g无线宽带路由器组成无线网桥的设置方法（Method for setting up wireless bridge of two TP-LINK 340g wireless broadband routers）.doc

两台tp-link 340g无线宽带路由器组成无线网桥的设置方法（Method for setting up wireless bridge of two TP-LINK 340g wireless broadband routers） Method for setting up wireless bridge of two TP-LINK 340G wireless broadband routers Suppose you have a, B, two routers, a router is connected to the Internet devices (such as ADSL, fiber, Cable, Modem, etc.), The B router connects to the client. First, set up on a router: 1, open the IE browser input: 192.168.1.1, In the login window, enter the user name and password are: admin; 2, after entering the routing settings interface, select wireless settings; 3, in the Bridged before the hook, the B router MAC address input (MAC address at the bottom of the router is indicated), Note that when you enter, the MAC format is 11-11-11-11-11. Each 2 digit number is separated by the - number; 4, assign a fixed IP address (192.168.1.2) to the B router by way of MAC binding; 5, open the DHCP function; 6, restart a router, restart, close a router. Set again on the B router: 7. Enter 192.168.1.1 to enter the routing settings; 8. Change the IP address of LAN port to 192.168.1.2; 9, in the Bridged before the hook, the routing of a MAC address input (MAC address at the bottom of the router is indicated), Note that when you enter, the MAC format is 11-11-11-11-11. Each 2 digit number is separated by the - number; 10, the WAN port settings changed to fixed IP connection, fixed IP address is: 192.168.1.2; 11, close the DHCP function; 12, restart the second router. Bridging is completed, and then open a router, you can access the Internet After opening the router configuration page Point to the left -- wireless parameters -- basic settings -- tick open Bridge -- and then enter the wireless MAC address of another route under the following AP1s MAC address. Note that the wireless MAC address is saved and the settings are saved Then the configuration of another route, also open Bridge function - enter the wireless MAC address just been configured in the AP1 Mac. here, simpl