商场设计规范（Shopping mall design code）.doc

商场设计规范（Shopping mall design code） Shopping centers, shopping malls, shopping malls, shops, architectural design standards, shopping centres, shopping malls, shopping malls, shops building design specifications Chapter I General Provisions Article 1.0.1 This regulation is formulated for the purpose of ensuring that the architectural design of a store is in conformity with the basic requirements of application, safety and sanitation. Article 1.0.2 This Regulation applies to the construction of shops (including shops with comprehensive construction) in new towns and industrial and mining areas in china. Article 1.0.3 architectural design of shops shall conform to the requirements of urban planning and environmental protection, and shall rationally organize traffic routes to facilitate the masses and reflect the care of disabled persons. Article 1.0.4 the size of a store building shall be classified as large, medium or small according to its type of use and floor space, and shall conform to the provisions of table 1.0.4. Article 1.0.5 shop building design shall be in conformity with the provisions of this code, and shall conform to the general rules for civil architectural design (JGJ37-87), as well as the relevant design standards, specifications and regulations issued by the state and professional departments. The second chapter, base and general plane Section 1 site selection and layout Article 2.1.1 large and medium-sized shop building base should choose the appropriate location in urban commercial areas or main roads. Large and medium-sized vegetable market construction base, access exit from the city road intersection, red line turning point should not be less than 70m. The service radius of store building within the district should not exceed 300m. Article 2.1.2 the store building is located in the vicinity of a and B fire hazard workshop, warehouse and flammable and combustible materials yard; as a result of land use conditions, the safety distance shall conform