网站大量收购独家精品文档,联系QQ:2885784924

外保温施工(External thermal insulation construction).doc

外保温施工(External thermal insulation construction).doc

  1. 1、本文档共17页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
外保温施工(External thermal insulation construction)

外保温施工(External thermal insulation construction) External heat preservation First, the scope of technical disclosure content 1, it is suitable for exterior wall thermal insulation project of cast in place reinforced concrete wall. 2 seismic fortification intensity is less than or equal to 8 of the area. 3 building height is less than 100m. Two, materials and machinery equipment 1 material performance index 1.1 technical performance indexes of steel wire mesh and polyphenyl board The processing quality and specification size of the steel wire mesh polyphenyl board shall be in line with the relevant regulations of the national steel wire mesh frame, cement polystyrene sandwich board and JC623-1996, and shall also conform to the provisions of table 6.1.1-1 ~ 3. Table 1.1-1 main technical indexes of steel wire mesh polyphenyl board Sub project quality requirements specifications surface Appearance Quality trapezoidal groove, steel wire mesh side of polystyrene board surface, trapezoidal groove width 20 ~ 30mm, groove depth 10mm + 2mm, slot from 50mm The two sides of the polystyrene board are provided with a high and low groove, and the width is 20 to 25mm, and the depth is 1/2. The thickness of the plate is required, and the size is accurate. Interface processing, panel and steel wire spray coating, mortar and steel wire and polystyrene board firmly adhered. The coating is uniform, not open at the end, dry rub off powder. Polyphenyl plate butt = 3000mm long board polystyrene board butt joint shall be not more than two, and the cement adhesive joint. The shortest distance between steel wire mesh and polystyrene board is 5mm + 1mm Galvanized low carbon steel wire for galvanized low carbon steel wire diameter steel mesh for 2.00mm and 2.20mm for Xiecha wire galvanized low carbon steel wire diameter of 2.00mm, 2.50mm, error is about 0.5mm, the performance shall comply with the provisions of YB/T126-1997. The solder joint tensile force is greater than or equal to 330N, no ove

您可能关注的文档

文档评论(0)

f8r9t5c + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8000054077000003

1亿VIP精品文档

相关文档