外墙施工（Exterior wall construction）.doc

外墙施工（Exterior wall construction） Compilation basis An excellent Anthology of architectural products (2001YJ114) The professional standard of rubber powder polystyrene particle exterior insulation system (JG 158-2004) Standard for design of energy efficiency for civil buildings (heating, residential and building) (JGJ26-95) The exterior insulation construction (a) (02J1211) External insulation of exterior wall with rubber particle polystyrene thermal insulation material (YJGF41-2000) Standard for energy efficiency design of residential buildings in hot summer and cold winter zone (JGJ 134 - 2001) Technical specification for exterior wall insulation engineering (JGJ 144 - 2004) Code for acceptance of construction quality of energy saving building works (GB50411-2007) Code for construction acceptance of building energy efficiency projects GB50411-2007 general provisions Quality acceptance of building 4.1.1 this chapter applies to plate, slurry, bulk and prefabricated composite wallboard wall insulation material or component walling energy-saving engineering. Completion of the main structure of the 4.1.2 after the wall energy-saving construction, construction should be at the grassroots level quality acceptance, timely quality inspection and acceptance of concealed work and inspection lot acceptance in the construction process should be completed, the construction should be carried out after the wall energy saving project approval. And the main structure of the construction of energy-efficient wall projects should be accepted with the main structure. 4.1.3 wall energy saving projects, when the use of external insulation stereotypes products or complete sets of technology, the type of inspection report should include safety and weather resistance test. 4.1.4 the wall energy conservation project shall carry out concealed works for acceptance of the following parts or contents, and shall have detailed written records and necessary image data: 1 insulating layer attached to