室内地板施工工艺（Indoor floor construction technology）.doc

室内地板施工工艺（Indoor floor construction technology） Technical standard for construction decoration decoration, the first section on the ground floor stone A, 1, 1) for construction materials (stone field lofting, lofting drawings confirmed after processing by the stone factorys products) varieties, specifications and quality should meet the requirements of the design and construction specifications. 2) cement: No. 32.5 ordinary portland cement or slag Portland cement, and prepare the right amount of wiping seam with special caulking agent (color and stone control). If laid for light colored stone, white cement and white perlite should be prepared. 3) sand: medium sand or coarse sand (sand with gold yellow as the best, avoid using mud containing large amount of black sand), containing mud 3%. A sieve with an aperture of 8mm. 4) stone surface protection agent (recommend using imported products). 2, operating conditions 1) stone plate after entering the process should be stacked in the room, side piled up, should be padded below. And detailed check varieties, specifications, quantity, quality and so on, whether it meets the design requirements, cracks, missing edges, corners may not be used. Cutting holes are required and machined well before installation. Stone processing in off-site processing. Indoor plastering, water and electricity equipment, pipelines and so on have been completed. The wall around the room is played well, +50cm horizontal line. The construction should be released before construction of a large drawing laying stone ground. 2) after the stone enters the arena, must shovel behind the stone material the grid cloth, then uses the stone protection agent to carry on the six face protection to the stone material, after drying, has paved again. B, operation process 1, familiar with drawings: construction drawings and processing orders based on, familiar with the various parts of the size and practice, and understand the relationship between the mouth, edge and