发那科（fanuc）.doc

发那科（fanuc） Advanced foresight control (APC) A unit of scale; a large machine; a medium-sized machine Machine meaning 1432 Mm/min set the actual maximum cutting feed rate of each spindle The 1620 Msec sets the linear or bell shaped acceleration and deceleration time constant in the G00 fast shift mode 1621 Msec sets the bell shaped acceleration and deceleration time constant T2 in the G00 fast shift mode 1730 Mm/min 325051507275 arc radius R maximum feed rate 1731 Um 500050005000, the feed rate is Clamp according to the radius of arc 1732 Mm/min 100100100, minimum feed rate according to arc radius as feed rate Clamp 1768 Msec 241616, plus deceleration time constant after interval 1770, Mm/min 10000, fill up, front and back deceleration, maximum feed rate (advance control) 1771, Msec 1606834, line up, front acceleration, deceleration, maximum feed rate, time T1 (advance control) 1783, Mm/min 4005001000, according to the speed difference for the corner deceleration (complement, front / deceleration / each axis are set) Fixed parameters that do not need to be adjusted 1602#0 1 before the interval between the acceleration and deceleration of B type 1602#4 1 automatic corner reduction skills 0: according to angle 1: according to the speed difference to perform corner acceleration and deceleration When 1602#6#3 10 AICC mode is cut, the mode [00] is exponential, [10] linear, [01] bell shaped after filling 1802#7 0/1, when the CMR is greater than 2 (1820 is greater than 4), you need to set it to 1. Error improvement of radius accuracy in 3403#0 1 arc patch Advanced intelligent foresight control (AIAPC) A unit of scale; a large machine; a medium-sized machine Machine meaning 1432 Mm/min set the actual maximum cutting feed rate of each spindle The 1620 Msec sets the linear or bell shaped acceleration and deceleration time constant in the G00 fast shift mode 1621 Msec sets the bell shaped acceleration and deceleration time constant T2 in the G00 fast shift mode 1730 Mm/min 3250