FastenerIndustryApplication扣件工业检测应用.PDF

扣件工業，檢測應用 Fastener Industry Application 1.有無牙、粗細牙、半全牙 14.偏心 1.With thread 14.Concentricity 2.有無電鍍或電鍍不良 15.長度 (fine or coarse/half or full thread) 15.Length 3.變形、破損 16.寬度 2.With coating 16.Width 4.有無印記 17.厚度 3.Deformed, Broken 17.Thickness 5.表面缺陷 18.牙外徑 4.With mark 18.Major diameter 6.斷針、塞孔 19.牙底徑 5.Surface defect 19.Minor diameter 7.破裂 20.牙距 6.Broken pin or Recess Depth 20.Pitch 8.牙絲、毛邊 21.斜牙 7.Crack 21.Cross thread 9.外觀形狀不同 22.倒角角度 8.Burrs or chinps 22.Chafer angle 10.六角對角長 23.夾角 9.Different Shape 23.Included angle 11.六角對邊長 24.圓弧半徑 10.Hex diagonal length 24.Arc radius 12.直徑、孔徑 25.平行邊 11.Hex opposite edge length 25.Parallel eage length 13.真圓度 26.有無割尾 12.Diameter/Hole diameter 26.With cutter 13.Roundness 1.有無牙、粗細牙、半全牙 5.表面缺陷 9.外觀形狀不同 13.長度、寬度、厚度 With thread(fine or coarse thread) Surface defect Different Shape Length/Width/Thickness (half or full thread) 2.有無電鍍或電鍍不良 6.斷針、塞孔 10.六角對角對邊長 14.牙外徑/牙底徑/牙距/斜牙 with coating Broken pin or Recess Depth