J型径向爪式弹性联轴器JTypeRadialJawFlexible-GlobalSources.PDF

J型径向爪式弹性联轴器 JTypeRadialJawFlexibleCoupling J型径向爪式弹性联轴器是我公司在吸收国外同类产品先进技术的基础上，开发研制的一种 适用于输送设备的新型联轴器。 J-type radial jaw flexible coupling is a new type of coupling suitable for conveying equipment developedbyourcompanybasedonabsorbingadvancedtechnologyofthelikeproductsabroad. J型径向爪式弹性联轴器的特点 CharacteristicsofJ-TypeRadialJawFlexibleCoupling 1. 弹性体选用丁晴和聚氨酯材料 能有效地减少运行过程中产生的振动和冲击 防止噪声； Elastomer selectsnitrile andpolyurethanematerial,which caneffectivelyreducethevibration andimpactgeneratedduringoperationinordertopreventnoise. 2. 弹性体径向布置，轴向、径向、角向误差的允许范围较大，便于对中安装； Radial arrangementofthe elastomerwithrelatively largeallowablerange ofaxial,radial, and angularerrortofacilitateinstallationalignment. 3. 联轴器工作时，弹性体受挤压，其可靠性和安全性高； Whenthecouplingisworking,theelastomerissqueezedanditsreliabilityandsafetyarevery high. 4. 弹性体拆装非常方便，不需移动联轴器半体即可用手取出； The assembly and disassembly of the elastomer is very convenient, it can be taken out with handwithouttheneedtomovethehalfcoupling. 5. 传递扭矩大，可达780KNm； Thetransmissiontorqueislarge,whichcanreachupto780kNm. 6. 可增加制动盘用于使用制动器的场合。 Brakedisccanbeaddedfortheapplicationwherebrakeisused. J型径向爪式弹性联轴器结构 StructureofJ-TypeRadialJawFlexibleCoupling JLCC型双边可拆标准轴套联轴器：两边的径向爪式联接盘通过螺栓与两端的联轴器半体联 接，可拆卸。 JLCCstandardtype sleevecouplingremovableonboth sides:radialjaw typeconnectingplates on bothsidesareconnectedwithhalfcouplingwithbolts,whichareremovable.联轴器轴套（半体） 为标准系列。Thecouplingsleeve(halfbody)isastandardseries. JLCC-1双边可拆长轴套联轴器：两边的径向爪式联接盘通过螺栓与两端的联轴器半体联接 可拆卸。联轴器轴套（半体）为长系列。 JLCC-1 long-sleeve couplingremovable onboth sides:radialjaw type connectingplates onboth sidesareconnectedwithhalfcouplingwithbolts,whichareremovable.Thecouplingsleeve(half body)isalongseries. JLCCS双边可拆单内轴套联轴器：两边的径向爪式联接盘通过螺栓与两端的联轴器半体联 接，可拆卸。联轴器的一个轴套（半体）向中间延伸一定长度。 JLCCSsingleinnersleevecouplingremovable onboth sides:radialjaw type connectingplates