小型TCGRunner小型TCGRunnerTCGRingRunner.PDF

Ring TCG Runner T r o c h o i d C a m G e a r 新 規 格 新 規 格 小型 小型TCG Runner TCG Runner [ 2011年推出 ] [ 2011年推出 ] 性能超越傳統滾珠螺桿、精密齒條+小齒輪的直線、曲線驅動系統 Introduction of linear and curvilinear drive system superior to ball-type screw and rack pinion. KAMO SEIKO CORP. Non-Backlash New System Rack Pinion 無　背　隙　／　Non-backlash ●因為常態下即有2～3個接觸面，所以正逆轉方向都不會有齒隙問題的產生。 ◦Trochoidal profiled tooth enables us to make a plurality of mutual teeth mesh at one time. The teeth always mesh via two or three portions and eliminate backlash when rotated in one or another direction. 高　精　度　／　High accuracy ●輸送精度(回轉與線性比)與定位精度方面則與精密級滾珠螺桿相互媲美。 ◦Instead of gears, a combination of cam and roller makes a positioning accuracy and feeding accuracy (rotation-linearity ratio) as nearly as that of the ball-screw structure. 低噪音‧低振動　／　Low noise and low vibration ●在最適化的軌跡線曲線齒形上，以軸承所支撐的滾子很平滑的轉動，因此齒打音、轉送音的產 生非常微小，噪音的產生與振動也都非常低。 ◦Rollers smoothly mesh with the optimized trochoidal tooth surface so as to avoid rattling noise, tooth striking noise and rotating noise from being induced together with the least amount of vibration. 低　發　塵　／　Low dust ●利用平滑的滾動運轉，回轉部分是小徑低速，故低摩擦且發熱和發塵非常少。 ◦Due to the smooth rotation, the structure dispenses with a least amount of heat and dust generated and cope with a clean room operation. 長行程‧高速化實現　／　Extended lengt