苯酚丙酮初步设计.doc

  1. 1、本文档共19页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
摘 要 苯酚丙酮(DBA)又名尼龙酸,是己二酸生产过程产生的副产物,仅国内己二酸生产企业每年就副产混合二元酸40-60万吨。由于其含杂质、水分多,颜色呈绿色或黄褐色,难以利用。国外一般将其送进污水处理装置作焚烧或填埋处理;国内有采用重结晶法回收,但回收率低于60%,废水量较大,不仅对环境造成污染,而且也造成资源的浪费。本文研究以C4-C6混合二元酸为原料、对甲苯磺酸为催化剂,制备混合二元酸二甲酯,并利用减压精馏得到纯净的二甲酯。实验中考查了各种反应的影响因素,并利用制备的混合二甲酸二甲酯与异辛醇进行酯交换制备混合二元酸二异辛酯。根据实验数据表明,通过酯化法分离混合二元酸的工艺路线是可行的。酯化的适宜反应条件为:反应时间5.0h,醇酸物质的量比61,催化剂用量1.0%混合酸,以此条件,二元酸二甲酯的收率可达89%。酯化所得粗酯可以在压力为40mmHg下进行减压精馏,截取95~105℃下的馏分,为丁二酸二甲酯,截取110~120℃下的馏分,为戊二酸二甲酯,截取145~155℃下的馏分,为己二酸二甲酯。利用精馏所得的二元酸二甲酯,通过酯交换法制得的二元酸二异辛酯的颜色很浅,说明通过酯化法可以有效地分离混合二元酸。 关键词:;;酯交换;混合二元酸二甲酯Abstract Mixed dibasic acid (DBA), also known as nylon acid, adipic acid production process by-products, only domestic producers of adipic acid by-product mixture in each of dicarboxylic acid 40-60 million tons. Because of its impurities, water content, the color green or brown, it is difficult to use. Foreign general to be sent to sewage treatment plant for incineration or landfilling; domestic use recrystallization recovery, but recovery was less than 60%, large amount of wastewater, not only pollute the environment, but also a waste of resources. In order to make the best use, this application of basic research carried out to C4-C6 dicarboxylic acid as raw material mixture, p-toluenesulfonic acid as catalyst, prepared by mixing two yuan acid ester, and the use of vacuum distillation to get pure dimethyl ester. Experiment examined the response of various factors, and use a mixture of dimethyl ester prepared with different octanol prepared by mixing two yuan for transesterification ethylhexyl sebacate. According to the experimental data show that, by esterification of dicarboxylic acid mixture separation process route is feasible. Esterification of the appropriate reaction conditions: reaction time 5.0h, alkyd molar ratio of 6:1, 1.0% mixed acid catalyst, in this condition, binary acid ester yield of 89%. Esters derived from crude esterification can be carried out under the pressure of 40mmHg vacuum distillation, the interception of 95 ~ 1

文档评论(0)

zxiangd + 关注
实名认证
内容提供者

本人从事教育还有多年,在这和大家互相交流学习

1亿VIP精品文档

相关文档