iec62366b报告模板.doc

12 Test Report issued under the responsibility of: TEST REPORT IEC 62366 Medical devices – Application of usability engineering to medical devices Report Reference No. : FORMTEXT Date of issue : Total number of pages : CB Testing Laboratory : Address :  Applicant’s name : Address :  Test specification: Standards : IEC 62366: 2007 (First Edition) for use in conjunction with IEC 60601-1-6: 2010 Test procedure : CB Scheme Non-standard test method…………..: N/A Test Report Form No. : IEC62366B Test Report Form Originator : TüV Rheinland North America Master TRF : Dated 2011-07 Copyright ? 2011 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the readers interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo shall be removed.This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. Test item description : Trade Mark : Manufacturer : Model/Type reference : Ratings : Testing procedure and testing location: FORMCHECKBOX CB Testing Laboratory: Testing location/ address :  FORMCHECKBOX _ Associated CB Test Laboratory: Testing location/ address :  Tested by (name + signature) : Approved by (+ signature) : FORMCHECKBOX Testing procedure: TMP Tested by (name + signature) : Approved by (+ signature) : Testing location/ address :  FORMCHECKBOX _ Testing procedure: WMT Tested by (name + signature) : Witnessed by (+ signature) : Approved by (+ signature) : Testing location/ address :  FORMCHECKBOX _ Testing procedure: SMT