852 SMD REWORK SOLDERING STATION （852年SMD返工焊接站）.pdf

852 SMD REWORK SOLDERING STATION MANUAL Welcome to use SMD REWORK SOLDERING STATION/KADA 852 Produced by our factory. It is specially designed for higher efficiency and saving your time. It is very convenient to shift a switch for the separate f unct ion of e lect ricalt ip soldering a nd hot a ir solde r ing o r combined functions with flexibility and high efficiency. Please read this man ual caref ully before you use it. Package list Please check and confirm the following items in the package when you purchase Item quantity 852 1 Soldering tip 1 Soldering tip stand 1 (Sponge for cleaning is included) 1 Holder for handle of hot air soldering head 1 Manual 1 WARNING: 1) Remove the 2 pump securing screws (MS* 10). Otherwise it will cause big problem. 2) Read this manual carefully before you use this machine. 3) Ground must be connected for prevention of static release before use. 4) Dont damage the piece against removal. Otherwise guaranteed service will be invalid. 5) Dont put any other metal article near the soldering tip net. Otherwise damage or electric shock will be caused. 6) Please contact with the supplier if the machine is in trouble. Be sure to lock the pump securing screw in red at the bottom of the machine before the delivery. NAMES OF PARTS: 1) Shell of the machine 2) Switch of air control 3) Air flow indicator 4) Switch of temperature control (see temperature chart) 5) Indicator of temperature (it will be on during normal working period) 6) Switch for temperature setting of the tip 7) Indicator of