ICL7667 Datasheet - Intersil（ICL7667数据表英特锡尔）.pdf

ICL7667 Data Sheet September 4, 2015 FN2853.7 Dual Power MOSFET Driver Features The ICL7667 is a dual monolithic high-speed driver designed • Fast Rise and Fall Times to convert TTL level signals into high current outputs at - 30ns with 1000pF Load voltages up to 15V. Its high speed and current output enable • Wide 15V Supply Voltage Range it to drive large capacitive loads with high slew rates and low - V+ = +4.5V to +15V propagation delays. With an output voltage swing only millivolts less than the supply voltage and a maximum supply - V- = -15V to Ground (0V) voltage of 15V, the ICL7667 is well suited for driving power • Low Power Consumption MOSFETs in high frequency switched-mode power - 4mW with Inputs Low converters. The ICL7667’s high current outputs minimize - 20mW with Inputs High power losses in the power MOSFETs by rapidly charging and discharging the gate capacitance. The ICL7667’s inputs • TTL/CMOS Input Compatible Power Driver are TTL compatible and can be directly driven by common - ROUT = 7 Typ pulse-width modulation control ICs. • Direct Interface with Common PWM Control ICs Ordering Information • Pin Equivalent to DS0026/DS0056; TSC426 PAR