Installation Guide Sportster 34” Sport Trike Kit（安装指南Sportster 34u201C运动三轮车工具包）.pdf

Installation Guide Sportster 34” Sport Trike Kit INCLUDED IN YOUR TRIKE KIT: COMPONENTS Frankenstein Trikes Rear End 2 Sport Shocks Swing Arm 2 Sport Fenders 2 Fender Brackets 10 lug nuts 2 American Eagle 15” X 8” wheels style 186 1 2 Center caps and 2 General Altimax 215/60R15 tires HARDWARE PULLEY MOUNTING 5 pcs. - 7/16” -14 x 1 1/2” Grd. 8 (Gold) Bolt 5 pcs. - 7/16” Lock Washer FENDER MOUNTING 14 pcs. - 3/8” - 16 x 1” Grd. 5 (Zinc) Bolt 14 pcs. - 3/8” I.D. 1” O.D. 1/16” Thick Grd 5 Washer 14 pcs. - 3/8” -16 Nylock Nut NOTE! Additional hardware used to mount fender brackets to the rear end are pre- installed onto the rear end. SHOCK MOUNTING NOTE! Depending on the year of your sportster your kit may include one or more of the following. 2 - Upper Shock Studs (‘91-’99) 2 - 1/2” - 13 x 2 1/4” Grd. 8 Bolt (Lower) 2 - 1/2” - 13 x 3 1/2” Grd. 8 Bolt (Upper)(‘04 up) 2 - 1/2” - 13 x 4” Grd. 8 Bolt (Upper)(‘00-’03) 4 - 1/2” I.D. 1” O.D. 1/8” Thick Grd 8 Washer 2 - 1/2” I.D. 1 1/4” O.D. 1” Long Spacer (Upper)(‘04 up) 2 - 1/2” I.D. 1 1/4” O.D. 1 3/4” Long Spacer (Upper)(‘00-’03) WHEEL MOUNTING 10 - Lug Nuts is included with every kit and must be used where instructed in this manual. 2 STAGE 1. Motorcyle Preperation: Always refer to your Harley-Davidson owners manual before performing any work on your bike. 1. Secure front wheel so motorcycle won’t tip, set jack under the mo- torcycle and raise the jack to take the weight off of the rear wheel. 2. Remove upper and lower belt guards. 3. Loosen axle adjusters on both side