Installation Instructions Supercharger System（安装说明增压器系统）.pdfVIP

Installation Instructions Supercharger System 94-01 Acura Integra GS-R B18C1 PART # 989-500 C.A.R.B. E.O. D-344-10 440 Rutherford St. P.O. Box 847 Goleta, CA 93116 1-888-888-4079 • FAX 805-692-2523 • SPECIAL NOTE: Because there are so Jackson Racing Supercharger Systems many different makes, models, and coun- are designed to be installed by individuals tries that we sell kits to, we are unable to with good mechanical sense and with the supply a new intake gasket or throttle body proper tools. Use your best discretion! gasket with your kit. Most of the time the The supercharger DOES NOT require a gaskets can be reused, but, for safety rea- break-in or warm up period. However, to sons, we recommend buying new ones prolong engine life, it is recommended that from your local Honda dealer before start- the engine be properly warmed up before ing the installation. If you do not have a operating under maximum boost. shop manual, buy one now! It is good to have one for any repairs now and in the WARNING: Once the installation is com- future. plete, CHECK AND RECHECK ALL fuel system connections for possible leaks TOOLS NEEDED: 8, 10, 12, 14, 17, and before operating the vehicle. 92-octane 30-mm socket and wrenches, a 22-mm gasoline (or higher) is required when run- (7/8”) wrench, a 30-mm (1-3/16”) and an ning a supercharger! 11-mm (7/16”) socket or wrench, 8-mm allen wrench, phillips and straight blade READ THESE INSTRUCT