SodaStream源装载机选项卡更换-iFixit.PDF

SodaStream Source Loader Tab Replacement SodaStream Source Loader Tab Replacement In this guide, you will be replacing the SodaStream Source Loader Tab. Written By : Angela Mossgro e © iFixit — CC BY-NC-SA www.iFixit .com Page 1 of 13 SodaStream Source Loader Tab Replacement INTRODUCTION The SodaStream Source creates soda when the loader tab is engaged. Pressing on this tab initiates carbonation and fla or infusion. This tab may become damaged through use and can be replaced through the steps gi en in this guide. The tab is located within the carbonating block and has its own co er. Replacement of the loader tab requires both external and internal disassembly of the de ice. This guide shows the steps to access this internal component. TOOLS: Philips Head Screwdri er: Size PH1 (1) © iFixit — CC BY-NC-SA www.iFixit .com Page 2 of 13 SodaStream Source Loader Tab Replacement Step 1 — SodaStream Source External Disassembl  Remo e the soda bottle and the CO2 canister from the machine. Step 2  Remo e the four 17.8 mm screw from the bottom metal base using a Phillips #1 screwdri er. © iFixit — CC BY-NC-SA www.iFixit .com Page 3 of 13 SodaStream Source Loader Tab Replacement Step 3  Pull the outer co er away from the front of the de ice. Step 4