车间变电所低压配电系统毕业论文.docx

车间变电所低压配电系统毕业论文目录摘要1Abstract21车间的负荷计算及无功功率补偿32确定车间变电所主变压器型式、容量和数及主接线方案63短路计算，并选择一次设备84选择车间变电所高低压进出线135选择电源进线的二次回路方案及整定继电保护166车间变电所的防雷保护和接地装置的设计及布线方案197选择低压配电系统的导线及控制保护设备21结论26致谢27参考文献28摘要本次设计是关于标准件厂冷镦车间低压配电系统及车间变电所的设计。最先从车间的布局考虑，参考了现在很多工厂的平面设计图对各部分的布局的可用性和经济性入手。接下来开始进入工厂厂区的供电设计部分。先从各部分的计算入手，其中包括计算负荷和短路电流的计算和一次设备稳定度的效验，及低压配电屏的选择。接下来，进行了对变电所高压进线和低压出线的选择，车间配电线路的设计。在变电所二次回路设计及继电保护整定当中我考虑了各方面的保护及对保护器具的选择。变电所设计自然少不了对防雷以及接地保护方面的设计，考虑到了车间布局的实际情况进行了对防雷接地设备的选择和设计。关键词：供电设计车间变电所电力系统AbstractThis standard is designed for Cold Heading Plants workshop low-voltage distribution systems and substations in the design workshop. From the first workshop to consider the layout, reference to the many factories graphic design plans for the layout of the various parts of the economy and the availability of research. Next entered the factory premises of the power supply design. Start with the start of the calculation, including the computational load and short-circuit current calculation of equipment and a stable of well-tested. and low-voltage distribution screen choices. Next, a pair of high voltage substations and low-voltage lines into the choice of wit, workshops distribution line design. Substation in the secondary circuit design and relay setting which I consider various aspects of the protection and the protection of equipment choices. Substation design to the natural missed Lightning protection and grounding design. Taking into account the actual layout of the workshop of the grounding of mine equipment selection and design. Keywords : design of low voltage power distribution substation shop high and low voltage power system equipment key words: power supply design substation in the workshop power system1车间的负荷计算及无功功率补偿1、车间的负荷计算1）车间设备组1负荷计算见表1-1：表1-1 冷镦车间设备组1的负荷计算表设备代号台数单台容量kw总容量kw需要系数Kd计算负荷/kw/kvar//A45桥式吊车218.737.40.150.51.7346梁式吊车18.28.20.150.51.73小计45.60.150.51.736.8411.813.720.8表1-2 冷镦车间设备组2的负荷计算表设备代号设备名称型号台数单台容量kw总容量kw需要系数Kd计算负荷/kw/kvar//A1冷镦机Z47-1216314960.20.51.732冷镦机GB-31