TMS320F2812的gel文件.doc

//* F2812 Memory Map *//* /* Note: M0M1MAP and VMAP signals tied high on F2812 core *//* *//* 0x000000 - 0x0007ff M0/M1 SARAM (Prog and Data) *//* 0x000800 - 0x000fff Peripheral Frame0 (PF0) (Data only) *//* 0x002000 - 0x003fff XINTF ZONE 0 (Prog and Data) *//* 0x004000 - 0x005fff XINTF ZONE 1 (Prog and Data) *//* 0x006000 - 0x006fff Peripheral Frame1 (PF1) (Data only) *//* 0x007000 - 0x007fff Peripheral Frame2 (PF2) (Data only) *//* 0x008000 - 0x009fff L0/L1 SARAM (Prog and Data) *//* 0x080000 - 0x0fffff XINTF ZONE 2 (Prog and Data) *//* 0x100000 - 0x17ffff XINTF ZONE 6 (Prog and Data) *//* 0x3d7800 - 0x3d7fff OTP (Prog and Data) *//* 0x3d8000 - 0x3f7fff FLASH (Prog and Data) *//* 0x3f8000 - 0x3f9fff H0 SARAM (Prog and Data) *//* 0x3fc000 - 0x3fffff XINTF ZONE 7 (MPNMC=1) (Prog and Data) *//* 0x3ff000 - 0x3fffff BOOT ROM (MPNMC=0) (Prog and Data) *//********************************************************************/ /********************************************************************//* f2812.gel *//* Version 3.30 *//* *//* This GEL file is to be used with the TMS320F2812 DSP. *//* Changes may be required to support specific hardware designs. *//* *//* Code Composer Studio supports six reserved GEL functions that *//* automatically get executed if they are defined. They are: *//*