上海静安小区高档别墅空调系统设计.doc

成人自考生毕业设计（论文） 学院MMY-MAP1004HT8-C机型。针对不同功能房间室内装修特点，及有无新风要求，选用不同形式的室内机，并按配置率150%～200%选择室外机。根据空调设备生产厂家的施工要求，布置室内外机位置、凝水管、风管及风口。 关键词：数码涡旋多联机，别墅空调系统，VRV, 自吸新风 Abstract Air conditioning is a room or space temperature , humidity, cleanliness and air flow speed adjustment and control, and to provide a sufficient amount of fresh air. Air conditioning can achieve full control of building thermal environment , air quality , which is now being widely used in modern architecture which . The design for the villa air-conditioning engineering design , location in Shanghai , the building area of 420 square meters , with a total area of ??353 square meters of air-conditioning , heating requirements in winter can be , capable of cooling in summer . The villa of the three , with a total area of ??small air-conditioning , each room size is relatively small, and there is an independent control requirements ; air conditioning use time dispersion , and the load is not among the functions while achieving maximum ; comprehensive consideration of the characteristics of the building, for comfort of the requirements and economic and other factors , the choice of digital scroll multi-line system , and the layers room partition , which meets the house at different times in different load requirements , but also to achieve the purpose of energy saving , while convenient operation and management , regulation flexible. First, the design of each room hot and cold wet load calculations , and then calculate the parameters of winter and summer air ; compared with each other through the use of a return air system , and the use of indoor inhalation according to the owners require a higher comfort requirements of the corresponding region new wind. Using environmentally friendly refrigerant R410a , choose Toshiba MMY-MAP1004HT8-C models. Interior room for different functional characteristics, and the presence of fresh air requirements , use of different forms of the indoor unit , and then config