ansys与其他软件接口（ANSYS interface with other software）.doc

ansys与其他软件接口（ANSYS interface with other software） [ask for help] Excuse me, heroes, how to import AutoCAD graphics to ANSYS for processing?. Thank you The AutoCAD model inputs Ansys 1. for 3D entities (3D, Object) AutoCAD: File -- Export... -- Save as type ACIS (*.sat) - input file name (3D object - selected entity) Ansys: File -- Import -- SAT input... Advantage： SAT file conversion is convenient, and there is usually no conversion problem Shortcoming: Only 3D object can be converted 2. swap files in IGES format AutoCAD 12 comes with an output IGES file tool, and AutoCAD 14 downloads the conversion tool from the AutoDesk site. Ansys: File -- Import -- SAT input... Advantage： All types of entities can be converted Shortcoming: Conversion trouble, and often need TOPO and GEOM Repair AutoCAD 14 conversion tools download: /ProdSupp/autocad14/iges/igespr14.exe 3. cadToansys Advantage： Convertible beam element Shortcoming: Conversion entity type is too small 4. dxf2ansys (highly recommended by Dummies) The software is installed directly into Ansys input format. In the pre process status, select the Read Input From menu input Advantage： Commonly used non three-dimensional entities can be converted. Since the conversion Keypoint initial value is optional, you can use AutoCAD to model each part individually, and enter it separately in the Ansys!!! Shortcoming: Convert entity type less [help] pro/E2001-ansys6.1 model import problem Just started using ANSYS6.1, when exporting models from the pro/E2001 featrueAnsys Geom, there is nothing on the ANSYS6.1, and the ac4pro.exe window shows: Geometry Transfer completed, Yanni edits in 2002-08-06 07:55 That is, the ANS file or anf file has been generated. You can exit the proe and go directly to the ANSYS to read the file. I just opened ANSYS6.1 today. I just learned this. I dont know where there is a foundation Tutorial, the model I made in PRO/E. Can I transfer it here for analysis? If so, how do I get into it? I learned f