蓝光主板的一些问题(Some problems with Blu ray motherboards).doc

蓝光主板的一些问题(Some problems with Blu ray motherboards).doc

  1. 1、本文档共10页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
蓝光主板的一些问题(Some problems with Blu ray motherboards)

蓝光主板的一些问题(Some problems with Blu ray motherboards) Q: elevator in self-study, learning from the beginning of the LER=17 fault, what reason, how to solve? A: the fault is caused by the lower limit of the elevator and the two gates at the same time. The solution is to adjust the distance between the lower limit and the lower gate area and ensure a gate area when the lower limit action is performed. Q: field elevator after learning, as long as running to the top, there will be no 18 fault, what reason, how to solve? A: examines layer data in microcomputer parameters and finds no top floor data. Well one examination found the upper limit installation is too low, resulting in self-learning is not yet in the top gate area hit the upper limit, the system does not distinguish the fault. Move up the limit and learn from yourself to solve the problem. Q: the elevator stops at the top floor and has a poor sense of comfort and does not open the door. What could be the cause? A: self-study, into the top gate area, did not enter the double door area hit the upper limit, will cause the length of the door area did not learn, and normal operation, parking always hit the upper limit, parking comfort is not good, and not open the door. Move up the limit and learn from yourself to solve the problem. Q: elevator at the end of the 20 fault occurred, the causes and how to solve? A: terminal station position changes, such as the original end station distance is short, is longer, no self learning, prone to No. 20 fault. When the end station position changes, should re learn. Q: elevator from learning to the upper end of the switch, reported No. LER23 fault, what is the reason? A: LER23 is no pulse feedback fault number 1, such as the use of multi speed elevator control method, in the frequency converter is not properly set the crawl speed, the fault occurs. 2, the main board of the pulse feedback, input loop and wiring problems, the fault will occur. Q: how to deal with abnormal problems wh

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档