防盗资料（Anti-theft data）.doc

防盗资料（Anti-theft data） Elysee： 1. interface: behind a drivers left leg of a plastic plate behind. Is the standard OBDII interface. 2. match key 1. select IMMOBOLIZER 2. select the CITROEN system. 3. select BERLINGO [SV] (98..) system 4. insert a key in the key, the screen shows: TURN, OFF, THE, COCPIT, turn off the ignition. Press any key to continue... Turn off the key and press for confirmation. Screen display: - - PROG, NEW, KEYS, match the new key The number of keys in MEM KEYS NUMBER memory IMMO ID READING reads the serial number of the burglar alarm PRESENT ERRORS current fault code ERROR RESET eliminates trouble codes Select PROG NEW KEYS, and then press the confirmation key Screen display: PROG NEW KEYS A IF YOU DONT HAVE PINCODE if you dont have a password YOU DONT CODIFY ANY KEY you cant match any key PIN CODE is a four digit letter. Press ESC to return and press OK to continue DATES INSERTION PIN CODE:XXXX password: XXXX KEY MEM:X key number: X Enter the password, press the OK key to continue. The password is on a plastic card similar to that of a credit card in the customers hands. The password is lost to the after sales service (to the body serial number) Enter the number of keys to match, press the confirmation key. Screen display: INSERT, THE (X), KEY, TO, PROG Insert the key in section X to match TURN, ON, THE, COCPIT, turn on the ignition PRESS ANY KEY any key continues Match start: insert the key to match to the ON position, and wait for 3-5 seconds to press any key to continue If the key is properly matched, the screen displays: THE KEY (X) IS PROGED The key X has been matched, TURN OFF THE COCPIT Turn off the ignition.. Transfer the key to the OFF position, wait 3-5 seconds, press any key to continue, repeat all of the above steps for all keys, and restart if there is an error in the matching process. After the match is successful, wait five minutes to start the engine. Test matching keys. Method for anti-theft matching of common models Models, an