氨基聚酯烤漆的用途.doc

Intended Uses 用途 适用于户外金属表面作美化和防护装饰性漆，如农用机械、矿山机械、交通设施、汽车、具有优良的抗冲击性能，优异的保色保光性能，附着力强，Suited for protection and decoration of metal and wood 。 such as hull, super structure, mast, flagpole, railing, chimney exterior, cabin interior,lifeboat and harbor machine etc. It forms a rough coating with high adhesion, bright color, good decoration, fair resistance to weathering, salt fog and water. It may dry at room temperature or may be backed at low temperature. Product Information产品简介 各色，高光、平光、哑光、闪光漆、 抗冲击性优，极好的保光保色性，附着力强。 All colors. High gloss. Consists of special alkyd resin and weather proof pigments. Application details 产品数据 Volume Solids 固体份 ≥55% Dry Flm Thickness干膜厚度 35microns equivalent to 88 microns of wet film 35微米相当于88微米湿膜厚 Theoretical Coverage 理论涂布率 8m2 /Kg 8平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 One package 单罐装 Method of Application 施工方法 Conventional Spray 喷涂 Recommended Thinner 稀释剂 二甲苯 环乙酮.丁酯 Cleaner 油漆设备清洗剂 二甲苯 环乙酮.丁酯 Pot Life 使用期 Not limit 不限制 Storage 贮存期 One year 一年 干燥时间 150～170℃（烘烤） 表干 （分钟） 3～5 实干 （分钟） 25～30 Storageand Handling 贮存与管理 Storage 贮存 Store in cool and dry conditions below flash point 贮存于阴凉干燥处 ,低闪点贮存. Pack size 包装规格 20Kg in 20 liter container 20公斤装于20公升容器中 Flash Point 闪点 ≥35℃ Specific Gravity 比重 1.10-1.20Kg/L 1.10-1.20公斤/公升 Specification and Surface preparation 技术要求及表面处理 Recommend coat: Spray 2 Coats with high-pressure airless spray to 60-80 microns of dry film thickness. Preceding coat: Iron red alkyd primer, alkyd red lead anti-corrosive paint and micaceous iron oxide aldyd anti-corrosive paint etc. 建议涂装道数：高压无空气喷涂一道，干