P13-C02(管道现场预制和安装).doc

Field Fabrication and Erection（P13-C02） 现场预制和安装 1. Scope范围 1.1 Plant Piping工业管道 This standard prescribes requirements for the field fabrication and erection of metallic piping inside plants, 本标准规定了工业金属管道现场预制与安装的要求, that is engineered and designed to ASME B31.1 and ASME B31.3 其他按照机械设计标准ASME B31.1, ASME B31.3的要求执行 This standard prescribes additional requirements of a supplemental nature, and does not abrogate the B31 codes in any way. 本标准规定的补充性规定,任何情况下都不能违背ASME B31的规定 1.2 Other Piping其他管道 This standard applies to ASME B31.3 piping that is attached to pipelines. 本标准与ASME B31.3中其他管道的要求一致 2. References参考书目 All referenced specifications, standards, codes, forms, drawings and similar material, including allrevisions, 所有的参考规范,标准,法规,表格,图纸和相关的材料,都包括修订本, addenda and supplements, shall be of the latest issue unless stated otherwise. 附录和补充性规定,都将以必威体育精装版出版的规定为准 When a project is in effect, the version of engineering and design codes, specifically ASME B31 codes, shall govern, as specified in the contract for that project. 当一个项目实施的工程设计规范有疑问时,应明确以ASME B31的条款为准,并且这些清单在此项目的合同中列出 SABIC Engineering Standards (SES) SABIC工程标准 P01 E15 Pressure Testing and Lay up Procedures 压力试验和实施程序 P28 G01 Piping Joints 管道连接 P27 G01 Selection of Bolts 螺栓选择 W05 F02 Welding Requirements for On-Plot Piping 地上管道的焊接要求 E29 C01 Cathodic Protection 负极保护 W02 F01 Welding-Safe Practices 焊接安全防护 Q01 T07 Pressure Vessels Materials Inspection Program 压力容器材料检测程序 W01 F01 Welding and Inspection -Performance Standards 焊接检测执行标准 P01 E27 Cleaning Requirements of Piping Systems 管道系统清洗要求 P01 E08 Expansion Joints and Cold Spring 膨胀节和冷弹簧 P14 T01 Inspection Requirements of In-service Pipeline 正在使用的管道检查要求 P13 C01 Construction, Installation and Backfilling Procedures 建筑安装和回填程序 P12 S04 Color Coding Criterion 颜色代码规范 Industry Codes and Standards 工业代码和标准 American Society of Mechanical Engineers (ASME)美国机械工程师协会 B31.1 Power Piping 动力管道 B31.3 Process Piping 工艺管道 PFI ES3 Fabrication Tolerances 制作公差 PFI ES24 Pipe Bending tolerances 管道弯曲公差 3. De