12xcxcxc（12xcxcxc）.doc

12xcxcxc（12xcxcxc） First, the logging process The location coordinates well early, retest design team, equipment, materials and materials to design details, check the logging logging conditions - - Discussion - Completion - completion completion data submitted, approval rating, printing and binding file. 1. location: coordinate coordinate unit: oil production factory, hospital etc.. 2. site preliminary retest: the survey team completed. Wells reassays should be completed before the provisions of party in drilling, without bidding or failing to arrange well shall be carried out reconnaissance and initial test wells. Design: 3. (1), the preparation process: take notice to collect data of adjacent wells design, printing and binding, issuing approval. (2) design content: Exploratory well: ① basic data ② regional geology; introduction ③ design basis and drilling purpose ④ designing stratigraphic section and predicting the location of oil, gas and water layers ⑤ formation pore pressure prediction and drilling fluid performance requirements ⑥ access to data requirements ⑦ and sending sample requirements ⑧ well quality requirement and midway test requirement ⑨ technical specifications and requirements #9321, drawings and schedules (well location drawings, cross well sections, seismograms, section histograms, pressure forecasts, sample analysis, project requirements, etc.) Development well: ① basic data table ② drilling purpose and design basis ③ design stratified and adjacent well Slicing Data ④ adjacent well data ⑤ requirements for the use of drilling fluids ⑥ access to data requirements ⑦ cementing requirements #9319, engineering hints and requirements #9320, drawings and schedules For 4, wells: (1): comprehensive logging team team, general 6, 7 people, 3 geological team (2) equipment: exploration well, according to the requirements of Party A (3) and material: sand box, sample bags, labels, and Drug Analysis Report (4) data: adjacent well logging map, well logging map an