东芝181复印机故障解决方案（Toshiba 181 copier trouble shooting solution）.doc

东芝181复印机故障解决方案（Toshiba 181 copier trouble shooting solution） Toshiba 181 copier trouble shooting solution! Internal supply Toshiba 181 adjust copy density? Answer: according to the original paper, handwriting tone depth, appropriate to adjust the copy density. If the original paper has a darker color, such as a newspaper, the copy should be slightly lighter, and the writing should be light, thin and not very clear. For example, the copy, the original manuscript, and the pencil manuscript, etc., should be kept deeper. When you copy a picture, you should always talk about the concentration. Toshiba 181 how to choose copy paper size? Answer: according to the original size, enlarge or reduce the magnification, press the box to select the jian. If the machine is equipped with the required size carton, it can be displayed on the panel; if there is no display, you need to change the carton. Toshiba 181 how to set the copy rate? Answer: General copier amplification only one file, press the zoom button can be, to reduce the magnification to A3-A4, B4-B5 or percentage, etc., to understand the size of the copy paper, you can easily select the reduction rate. If you do not need to zoom in or out, you can press any key. Toshiba 181 set the number of copies? Answer: press the number key to set the number of copies. If something is wrong, press the C button and reset. Toshiba 181 check machine display? Answer: after the machine has been preheated, you should see whether the display on the operation panel is normal or not. Mainly include the following: you can copy the signal display, carton position display, copy number shown as L, copy density adjustment display, paper size display, all show normal, you can copy. Toshiba 181 check the originals? Answer: the need to get copies of the manuscript, should be read about, need to pay attention to the following aspects: the paper size, texture and color of the original manuscript, the writing on the tone, the original need binding way,