格力空调制热时常出现外风机停机现象（GREE air conditioning system often appears outside fan stop phenomenon）.docVIP

格力空调制热时常出现外风机停机现象（GREE air conditioning system often appears outside fan stop phenomenon） GREE air conditioning heating often fan stop phenomenon, preventing indoor temperature protection GREE air conditioning heating often fan stop phenomenon, preventing indoor temperature protection Because some machines often appear fan stopping phenomenon in heating (anti indoor temperature protection). The investigation by the indoor machine temperature turns small, still have customer service parts warehouse controller tube temperature sensing packet is 5 K Omega, the barber to notice as follows: 1, the GREE 2000 series (including D machine), cloud, hummingbird controller. If the motherboard X117 is not directly welding temperature sensing needle board in the PCB package, the tube temperature temperature is 10K; otherwise, need to change according to the following method: remove the X117 needle, resistance to change R123 metal film resistor 8.4K or 8.4K , sheet resistance to indoor the tube temperature sensing packet (GREE 2000, hummingbird TY.13.02.66 encoding: FY TY.13.02.76 encoding: is directly welded on the PCB board. 2, GREE 2000 inverter controller. If the motherboard X105 is not directly welding temperature sensing needle board in the PCB package, the tube temperature temperature is 10K; otherwise, need to change according to the following method: remove the X105 needle, resistance to change R123 metal film resistor 8.1K , the indoor temperature control temperature (TY.13.02.66 encoding: is directly welded on the PCB board. 3, honey controller. If the motherboard X105 is not directly welding temperature sensing needle board in the PCB package, the tube temperature temperature is 10K; otherwise, need to change according to the following method: remove the X105 needle, put the R123 into the 8.4K metal film resistor , the tube temperature sensing packet TY.13.02.66A (encoding: is directly wel