DRAFT for BETA Release kadkraft（kadkraft草案为测试版）.pdf

KISSsoft Release 03/2014 Changes from Release 03/2013 to Release 03/2014 DRAFT for BETA Release KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@KISSsoft.AG www.KISSsoft.AG Contents General 3 Base packages 3 Base packages 3 System modules 6 KISSsys 6 Expert Modules Gears 6 Cylindrical gears 6 Configuration / Dimensioning 6 Methods for strength calculation 7 Contact analysis 7 Bevel gears 8 Worm gears (Globoid) 8 Crossed helical gears or Worm gears (Cylindrical-Worm gear) 8 Beveloid gears 8 Tooth form calculation 9 Further gear specific modules 9 Expert modules shafts and bearings 9 Shafts 9 Languages 9 CAD Interfaces 9 3D Export 9 COM Interfaces 10 This changes are relevant in the results, if opening an exsting KISSsoft calculation with older release. NEW This new features are highlights of the release 03/2014, regarding calculation or handling comfort. 29.01.2014 2 / 10 General Modules Changes / Enhancements General The personal settings are now depending on the KISSsoft release. The settings can be updated from older KISSsoft versions, under “Extras  Configuration tool”. The result window can be freely customized by the user, defined in a MMMMresx.rpt file. Data from tables can be copied to clipboard and then easily transferred to i.e. Excel Database Materials: the data for Bronze material are updated according to DIN EN 1982:2008 Tool Lubricants: some Klüber oils are added or updated. For gear wear calculation the factor kwLub is adde