实验四RIPv1与EIGRP在不连续网络下的比较.docx

实验四、RIPv1与EIGRP在不连续网络下的比较环境：两台2500系列路由器，由串口相连。要求：在RIPv1和EIGRP中将两个相同主类网络的不同子网由另一个主类网络分割，如何能学到对端网络。RIP配置：步骤一、基本配置RouterRouterenableRouter#config terminalRouter(config)#hostname R1R1(config)#no ip domain-lookup R1(config)#line console 0R1(config-line)#logging synchronous R1(config-line)#exec-timeout 0 0 R1(config-line)#exit步骤二、接口配置R1的配置：R1(config)#interface s0R1(config-if)#ip address 172.16.1.1 255.255.255.0R1(config-if)#clock rate 64000 R1(config-if)#no shutdownR1(config-if)#interface loopback 0R1(config-if)#ip address 10.1.1.1 255.255.255.0R1(config-if)#R2的配置：R2(config)#interface s1R2(config-if)#ip add 172.16.1.2 255.255.255.0R2(config-if)#no shutdownR2(config-if)#interface loopback 0R2(config-if)#ip address 10.1.2.1 255.255.255.0R2(config-if)#exitR2(config)#步骤三、启用RIP路由选择协议R1的配置：R1(config)#router rip?? 启用RIP R1(config-router)#network 10.0.0.0?? 发布直连网段R1(config-router)#network 172.16.0.0R1(config-router)#exitR1(config)#R2的配置：R2(config)#router rip 启用RIPR2(config-router)#network 10.0.0.0 发布直连网段R2(config-router)#network 172.16.0.0R2(config-router)#exitR2(config)#end显示路由信息R1#show ip route?? 显示路由信息Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter areaN1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGPi - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area* - candidate default, U - per-user static route, o - ODRP - periodic downloaded static routeGateway of last resort is not set172.16.0.0/24 is subnetted, 1 subnetsC 172.16.1.0 is directly connected, Serial0?? 没有学习到任何路由条目10.0.0.0/24 is subnetted, 4 subnetsC 10.1.3.0 is directly connected, Serial0C 10.1.1.0 is directly connected, Loopback0步骤四、配置辅助IPR1(config)#interface s0R1(config-if)#ip address 10.1.3.1 255.255.255.0 secondary 配置辅助IPR2(config)#interface s1R2(config-if)#ip address 10.1.3.2 255.255.255.0 secondary 配置辅助IP步骤四、显示路由信息R1#show ip route?? 显示路由信息Codes