基于MCX314步进电机运动控制器方案设计书.docVIP

摘 要 数控机床在整个现代制造业中处于基础性的、核心的地位。在现代制造系统朝着集成化、综合化和智能化发展的今天，特别是计算机的发展与普及化，深入研究新一代数控技术具有重要的意义。目前，以DSP为代表的高速高性能专用微处理器构成的运动控制器的数控系统成为数控技术的发展方向，运动控制器将成为未来数控系统的核心。 在本设计中，我们选用日本NOVA电子有限公司研制的DSP运动控制专用芯片MCX314。MCX314由硬件来实现复杂的运动控制算法，使得编程方便，接口简单，工作可靠，给运动控制带来极大方便，可广泛应用于数控机床、机器人等领域的运动控制。在MCX314的基础上，我们拟定了两种运动控制器的实现方案，并选定基于ARM芯片为主控制器的实现方案，即采用AT91FR40162和MCX314作为主要芯片，实现复杂的运动控制功能。设计完成基于AT91FR40162和MCX314的控制器硬件电路设计；设计了RS232串行接口和CAN总线接口实现与其他设备通信；分析了软件结构特点并完成部分程序编写，主要包含基本的测试操作函数和运动控制函数。 关键字： MCX314　　AT91FR40162 运动控制器　　 Title Design of Motion Controller Based On MCX314 Abstract Numerical control machine is on the basic and kernel position in the modern manufacture. With the modern manufacture system integrated, colligated and intelligent, especial the computer technology development and dissemination, studying the new generation numerical control and dynamics control technology is significant. At present, the numerical control system with motion controller is becoming to the numerical control technique development tide, motion controller will be to kernel of future numerical control system. We select DSP dynamics control special-purpose chip MCX314 made in NOVA electron corporation in our design. MCX314 can realize the complex motion control allergic with hardware, so it has advantage of convenient programming, simple interface and reliable work. It‘s very convenient to motion control and can be applied to numerical control machine tool, robot, etc. Based on MCX314, we design two scheme of motion controller and select the scheme which base on ARM, AT91FR40162 and MCX314 are main chips, the complex motion control function can be realized. In our design, the hardware circuit of controller was completed, the RS232 interface and CAN bus interface were designed so that the controller can communicate with other device. The software structure feature is discussed and some program was finished, including basic test function and motion control function. keywords: MCX314, AT91FR40162,