小ORBO更换相机-iFixit.PDF

Orbo J r. Camera Replacement Orbo Jr. Camera Replacement Replace a broken camera on the Orbo Jr. Written By : Ryan Christman © iFixit — CC BY- C-SA www.iFixit .com Page 1 of 7 Orbo J r. Camera Replacement INTRODUCTION This guide will walk you through replacing the camera on the Orbo Jr. The cable ribbon clip can be broken and may require a gentle touch. TOOLS: Portable Soldering Iron (1) iFixit Opening Tools (1) Spudger (1) © iFixit — CC BY- C-SA www.iFixit .com Page 2 of 7 Orbo J r. Camera Replacement Step 1 — Battery  Use your thumbs to gently pry the silicon case away from the tablet starting at one of the corners. Once the first corner is separated the other three corners should slip off easily . Step 2  Use the plastic opening tool to pry the back off the tablet. Work your way around the edges. Once you have one side open you can slowly unsnap the rest of the case and use the tool as needed.  Go slowly when you pry the back off to ensure you do not crack the case or damage the screen. © iFixit — CC BY- C-SA www.iFixit .com