PDMS管道命名规则.pdf

PLEASE NOTE: CADCentre has a policy of continuing product development: therefore, the information contained in this document may be subject to change without notice. CADCENTRE MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. While every effort has been made to verify the accuracy of this document, CADCentre shall not be liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance or use of this material. © Copyright 1994 CADCentre Ltd All rights reserved. No part of this document may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of CADCentre. The software programs described in this document are confidential information and proprietary products of CADCentre Ltd or its licensors. CadCentre LTD CADCentre GmbH CADCentre Inc High Cross Im Limespark 10700 Richmond Avenue Madingley Road Otto-Volger-Strasse 7b Suite 300 Cambridge CB3 OHB 65843 Sulzbach/Taunus Houston Texas 77042 England Germany USA Telephone: (0223) 314848 Telephone 06196 5052-0 Telephone (713) 977 1225 International (+44) 223 314848 International (+49) 6196 5052-0 International (+1)713 977 1225 FAX (0223) 65737 FAX (06196) 505222 FAX (713) 977 1231 (+44) 223 65737 (+49) 6196 505222 (+1) 713 977 1231 Index 1.Naming Components 2. Deriving Bolt Names 3. COCO Table Coding 4. Component CATREF codin