解放赛龙ⅡCA载货汽车驱动桥设计.docxVIP

C摘　　要本次设计的题目是解放赛龙ⅡCA1080货车驱动桥设计。驱动桥一般由主减速器、差速器、半轴及桥壳四部分组成，其基本功用是增大由传动轴或直接由变速器传来的转矩，将转矩分配给左、右车轮，并使左、右驱动车轮具有汽车行驶运动学所要求的差速功能；此外，还要承受作用于路面和车架或车厢之间的铅垂力、纵向力和横向力。本设计首先论述了驱动桥的组成，再分析驱动桥各部分结构型式，确定总体设计方案：采用整体式驱动桥，主减速器的减速型式采用单级减速器，主减速器齿轮采用螺旋锥齿轮，差速器采用普通对称式圆锥行星齿轮差速器，半轴采用全浮式型式，桥壳采用钢板冲压焊接式整体式桥壳。在本次设计中，主要完成了单级减速器、圆锥行星齿轮差速器、全浮式半轴的设计和桥壳的校核及CAD绘图等工作。关键词：驱动桥；主减速器；差速器；半轴；桥壳；CAD；设计；校核ABSTRACTThe object of the design is The Design for Driving Axle of truck of Cellon Ⅱ CA1080. Driving Axle is consisted of Final Drive, Differential Mechanism, Half Shaft and Axle Housing. The basic function of Driving Axle is to increase the torque transmitted by Drive Shaft or directly transmitted by Gearbox, then distributes it to left and right wheel, and make these two wheels have the differential function which is required in Automobile Driving Kinematics; besides, the Driving Axle must also stand the lead hangs down strength, the longitudinal force and the transverse force acted on the road surface, the frame or the compartment lead.The configuration of the Driving Axle is introduced in the theses at first. On the basis of the analysis of the structure ,the developing process and advantages and disadvantages of the former type of Driving Axle, the design adopted the Integral Driving Axle, Single Reduction Gear for Main Decelerator’s deceleration form, Spiral Bevel Gear for Main Decelerator’s gear, Full-floating for Axle and stamp-welded steel sheet of Integral Axle Housing for Axle Housing. In the design, we accomplished the design for Single Reduction Gear, taperedPlanetary Gear Differential Mechanism, Full-floating Axle, the checking of Axle Housing and CAD drawing and so on..Keywords:Drive Axle；Main Reducer；Differential；Axle；Bridge Shell；CAD；Design；Check目录摘要IAbstractII第1章绪论11.1 研究背景11.2 驱动桥研究的目的和意义11.3 驱动桥研究状况与发展趋势21.3.1 发展状况21.3.2 驱动桥发展趋势21.4 主要研究内容4第2章驱动桥结构方案拟定52.1 驱动桥的结构和种类52.1.1汽车车桥的种类52.1.2驱动桥的种类52.1.3 驱动桥结构组成52.2 设计要求102.2.1 适用车型102.2.2 设计基础数据102.3 本章小结10第3章主减速器设计113.1 主减速器的结构形式113.1.1 主减速器的齿轮