新风机特点（Features of new fan）.doc

新风机特点（Features of new fan） Panasonic whole heat exchanger, Panasonic fresh air ventilators, all types of general features 1, the design of low-noise, compact and thin shape is realized for the flow core 2, with 1 inspection port, all maintenance can be carried out 3, the construction of excellent linear inlet and exhaust way 4, can be installed upside down 5, with strong. 6, a combination of medium performance filters (additional purchase, field installation) The design of low-noise, compact and thin shape is realized by using 1. opposite flow cores 2. with 1 inspection port for all maintenance 3., the construction of excellent linear inlet and exhaust way 4. can be installed upside down 5. with a special thing The top and bottom of the full heat exchange core were cut (right). After converting the full heat exchange mode to the opposite flow mode, the height of the total heat exchange core is reduced from 287 mm to 230 mm in the same way as the previous cross flow core. The total heat exchange efficiency was improved by about 6%, and the total heat exchange efficiency was increased by about 6% due to the adoption of the opposed flow. Make a great contribution to energy conservation. The durable heat exchange core realizes the durability of the heat exchange core because of the adoption of the non-woven fabric filter with high collection efficiency as well as the improvement of the shape of the heat exchange inlet and exhaust duct. In the cross flow core, the air crosses in a straight line, but in the opposite direction, the air passes through the core for a long time, so the heat exchange efficiency is improved although it is thin. Combined with the use of heat exchange ventilation and ordinary ventilation, energy saving ventilation can be realized. (controlled by a dedicated switch) Heat exchange ventilation is carried out by refrigeration and heating in the chamber and by heat exchange Emissions of air-conditioning energy. Ordinary ventilation, as in spring or au