松下mv2v（Panasonic mv2v）.doc

松下mv2v（Panasonic mv2v） Panasonic mounter MV2V full view The 1. display area (DISPLAY) displays the action screen 2. power control (POWER, CONTROLS) on the power switch composition, including MAIN-CPU and OPERATION READY The 3. operations control (OPERATION, CONTROLS) contains the START, STOP, TEACHING keys, and trackball to move the pointer across the screen 4. floppy disk drives (FLOPPY, DISK) that store or transfer data between disk slices and machines 5. keyboard (KEYBOARD) as input numeric and text in program Panasonic SMD machine MV2V power control 1. SERVO MOTOR (servo motor) Switch servo motor power ON/OFF ON: servo lock OFF: servo lock lift When the SERVO MOTOR switch to OFF, XY, ZA, ZB and the other is controlled by the servo motor shaft is moved manually, if the switch back to ON, it will return to its original position (the RESET key is not pressed on that time) 2. FRONT OPERATION (front operation) Display operation right for front or rear Fang Liang: indicated as front control panel can be operated out: indicates rear control panel operable 3. MAIN CPU (main central processor) NEW MMI system power switch 4. POWER ON (power indicator) refers to the power supply of the machine. When it is bright, it indicates the power supply, and when it is out, no power supply is supplied 5. OPERATION READY ON (operation ON) turn on the machine power switch 6., OPERATION, READY, OFF (operation OFF) switch off the machine power Panasonic mounter MV2V operation control 1. START (start) used for starting production 2., STOP (stop), used for the suspension of production (light), and then press it will release, when the STOP key is lit, press the START key, the machine will only perform one of the procedures line action 3. RESET (reset) this key is used in accordance with the following conditions. When an error occurs: clear the fault state (after the cause of the fault has been removed). When no fault occurs: return the program to the start step The 4. FEEDER CARRIAGE (rack