美国联邦民航局维修厂训练计画中英对照版本 AC145-10.pdf

AC 145-10 Date: 7/8/05 ADVISORY CIRCULAR REPAIR STATION TRAINING PROGRAM Flight Standards Service Washington, D.C. Initiated By: AFS-300 PREFACE This advisory circular (AC) provides information on developing the repair station employee training program required under Title 14 of the Code of Federal Regulations (14 CFR) part 145, section 145.163, categories of training, training program components, and sample training programs. This AC also provides an acceptable means, but not the only means, of showing compliance with 14 CFR section 145.163. Neither of the sample programs described in Appendixes 1 and 2 of this AC need to be used; they only represent a possible way to structure a training program that meets the requirements of the regulations. Each person subject to part 145 should develop his/her own program tailored to his/her individual operations. Because this AC contains only guidance on developing a training program, the word ―should‖ used herein applies only to an entity that chooses to follow a particular suggestion without deviation. The FAA uses the word ―capability‖ to describe the knowledge and skills required to properly accomplish assigned tasks. The word ―competency‖ is used by EASA and many repair stations located outside the United States. These terms should be considered synonymous for the purposes of the training program and as used in this AC. This AC contains additional governmental, mandatory and non- mandatory subjects not specifically required by section 145.163. The FAA is aware that the additional training outlined in this AC exceeds that required by section 145.163, 聯邦航空 局了解於本咨詢通告中所概述but feel is necessary to provide these subject samples as a g