PALSON面包机使用说明.pdf

时间按钮 如果你不想就可以使用这个按钮来设置不同的启动时间，启动装置。 1。首先设置当前时间和要使用的项目，然后按一次。屏幕上显示的时间将当前时间+计划+ 10分钟选择总运行时间。“准备好了”的消息然后屏幕上出现。 GB 2。按时间反复修你想要的节目结束的时间。在10分钟的间隔时间的变化。它将会更快如果你把时间按下按钮。 3。按下启动/停止按钮来激活操作及液晶显示屏幕将显示时间当设备将停止“准备工作时间”将出现在屏幕上。 TIME BUTTON 4。你可以再按下时间按钮可以看到当前的时间。 5。如果你想取消设置，按下启动/停止按钮3秒钟。嗡嗡的声音会被听到。该计划设置将被取消。 If you do not want to start the appliance straight away you can use this button to set a different start time. 1. Firstly set the current time and the programme you want to use, and then press TIME once. The time that appears on the screen will be the current time + the total operational time for the programme chosen + 10 minutes. The “SET READY TIME” message will then appear on the screen. 2. Press TIME repeatedly to fix the time you want the programme to end. The time changes in 10 minute intervals. It will be quicker if you keep the TIME button pressed. 3. Press the START / STOP button to activate the operation and the LCD screen will show the time when the appliance will stop working and the “SET READY TIME” will appear on the screen. 4. You can see the current time by pressing the TIME button again. 5. If you want to cancel the setting, press the START / STOP button for 3 seconds. A buzzing sound will be heard. The programme set will be cancelled. 例如：当前时间为08:00，该计划的时间是3小时，你想在下午2点吃。 1。按钮，出现时间11:10。 2。按下时间按钮设定时间下午2:00，这意味着该设备将在上午11点开始。 Example: the current time is 08:00, the duration of the programme is 3 hours and you want to eat at 2 pm. 1. Press the TIME button and 11:10 appears. 2. Press the TIME button again and set the time to PM 2:00, this means that the appliance will start at 11:00 AM. 3. Press the START / STOP button to start the appliance. “PM 2:00” will appear in the display screen, the number on the screen will remain fi