楚天燧道烘箱说明书机械部分.doc

机械部分 目录 目录 设备的名称和型号 设备的外形及安装示意图 设备的主要用途和适用范围 设备的主要技术参数 设备的工作原理及主要结构 设备的吊运安装与调整 设备的操作与使用 设备的维护与保养 设备的电器操作说明 设备的一般故障排除 设备的名称和型号 Equipment Name and Model 名称：灭菌隧道 Name: Sterilization Tunnel 型号：AL-D400 Model: HM AL-D400 设备的外形及安装示意图 Equipment Outline and Installation Drawing 设备的主要用途和适用范围 Main Use and Applicable Scope of Equipment 主要用途 Main use 本机用于容器瓶的干燥，灭菌和冷却。它利用层流原理和热空气高速消毒工艺，使容器在洁净度A级的密封隧道内完成干燥，灭菌，去热原和冷却的无菌生产工艺流程。它可与洗瓶机，灌封机组成一条完整的洗，烘，灌，封自动生产线。 This machine is used for drying, sterilization and cooling of containers .It adopts LF principle and hot air high speed sterilization process, which can make the containers in the closed tunnel of Cleanliness Grade A complete the sterile production process of drying, sterilization, depyrogenation and cooling. This machine can form a complete compact line along with washing machine and filling and sealing machine for washing, drying, filing and sealing of containers. 适用范围 Applicable scope HM AL-D400型隧道式灭菌干燥机的隧道设计主要适合安瓿，口服液，抗生素瓶的干燥，灭菌处理。 HM AL-D400 is mainly applicable for drying and sterilization of ampoule, oral liquid and vial. Main specification: 主要规格： Main specification: 容器直径：Φ8mm-Φ64mm Diameter of container: Φ8mm-Φ64mm 容器高度：40-180mm Height of container: 40-180mm 隧道宽度(B) :600mm Width of conveying tunnel(B) :600mm 预热段(LE)有效长度: 580mm Effective length of preheating zone(LE): 580mm 加热段(LH)有效长度: 1320mm Effective length of heating zone(LH):1320mm 冷却段(LK)有效长度:860mm Effective length of cooling zone(LK): 860 mm 设备的主要技术参数 Main Technical Parameter of Equipment 输瓶网带有效宽度:600mm Effective width of conveyor belt: 600mm 5.2 干燥灭菌最高温度: ≤350℃ The highest temperature of sterilization and drying zone:≤350℃ 5.3 洁净度:达到国标A级 Cleanliness: national standard Grade A 5.4 动力能耗总电功率: 47.55KW Total power consumption: 47.55Kw 5.4.1预热层流电机: 1.1kW 1set LF motor in preheating zone 1.1kW 1set 5.4.2加热层流电机: