单螺杆泵的结构设计与性能分析（全套图纸）.doc

目 录 摘要 III Abstract III 1 绪 论 1 1.1 研究背景及研究意义 1 1.2 国内外研究综述 1 1.2.1 国外螺杆泵的应用现状 1 1.2.2 国内螺杆泵的应用现状 2 1.4 本题的研究内容和方法 3 2 单螺杆泵概述 4 2.1 引言 4 2.2 基本结构和工作原理 5 2.3 性能参数 8 2.4 应用特点 10 2.5 单螺杆泵的特性 11 2.6 单螺杆泵的选用 11 3 单螺杆泵结构设计与性能计算 13 3.1单螺杆泵结构设计 13 3.1.1 螺杆和衬套尺寸的确定 13 3.1.2 螺杆和衬套的型线设计 14 3.2 单螺杆泵材料的选用 18 3.3 单螺杆泵的加工制造 20 3.3.1 螺杆的加工 20 3.3.2 单螺杆泵橡胶定子的加工 20 3.4 单螺杆泵的性能计算 22 4 单螺杆泵应用实例设计 24 5 单螺杆泵的性能分析与运动仿真 27 5.1 单螺杆泵的性能分析 27 5.2 单螺杆泵三维模型的建立 27 6 结论与展望 30 6.1 结论 30 6.2 展望 30 谢 辞 32 参考文献 33  摘 要 随着工业技术的不断发展，各种液体的输送显得尤为重要，而作为液体传动工具的单螺杆泵亦显得举足轻重。工业的发展对单螺杆泵提出了更高的要求，某些特定的行业用单螺杆泵的工作条件十分恶劣，研制和开发使用性能良好的单螺杆泵将带来广阔的社会效益和经济效益。为更好的满足特定工作条件的需要，本论文详细阐述了单螺杆泵的工作原理和结构特点，并在传统的设计理论体系基础上，利用现有的设计手段和工具，根据给定的流量、压力来设计和选取合适的单螺杆泵结构参数，完成对单螺杆泵结构设计计算、主要性能计算和影响因素分析，在此基础上利用三维建模手段，建立有效的单螺杆泵三维模型，对所设计的单螺杆泵进行简单运动仿真，为其性能进一步改进提供了一定参考。 关键词: 单螺杆泵; 结构设计; 性能; 影响因素 Abstract With the continuous development of industrial technology, a variety of liquid transportation is particularly important, and the single-screw pump, a tool of fluid transmission, becomes also critical. Higher requirements are made to meet the demand of the industrial development on the single-screw pump, and some certain industries with a single-screw pump are under terrible conditions. It shows that researching and developing the single-screw pump of good performance will bring a broad social and economic benefits. To meet the better needs of specific working conditions, this paper explains clearly the working principle and structural features of single-screw pump, and designs and selects the appropriate single-screw pump parameters by a given flow and pressure on the basis of the traditional theoretical system and using of existing design methods and tools. So that the structural design calculations, key performance computing and influencing factors analysis are completed. After that, we establish an effective single-screw pump three-dimensional model by using of three-dimensional modeling for the simple kinematics simulation on t