Cameron SSMC 整体式井口装置安装操作手册.doc

SSMC System Installation Procedure The SSMC equipment described and depicted in this installation procedure is for reference purposes only. The equipment purchased may vary from this procedure and should be handled accordingly. Surface Wellhead Publication RP-775 January 31, 2003  ? Copyright Cooper Cameron Corporation, 2003  Table of Contents System Drawing 5 Bill Of Materials 6 Stage 1 — 30 Conductor 8 Install the Landing Ring 8 Install the Housing 9 Install the Drilling Adapter 11 Stage 2 — 13-3/8 Casing 12 Test the BOP Stack 12 Running the Wear Bushing before drilling 13 Retrieving the Wear Bushing after drilling 14 Install the Compact Spool 15 Test between the Seals 18 Install the Transition Seal 19 Install the Drilling Adapter 21 Stage 3 — 9-5/8 Casing 22 Test the BOP Stack 22 Blind Ram Test 23 Run the Wear Bushing before Drilling 24 Retrieve the Wear Bushing after Drilling 25 Hang off the 9-5/8 Casing 26 Washout the Compact Spool 29 Install the Seal Assembly 30 Testing the Seal Assembly 33 Stage 4 — 2-7/8 Tubing 34 Test the BOP Stack 34 Run the Wear Bushing before Drilling 35 Retrieve the Wear Bushing after drilling 36 Washout the Compact Spool 37 Install the Tubing Hanger 38 Install the control lines 38 Testing the Tubing Hanger Annular Seals 43 Install the SRL Seal 45 Install the Christmas Tree 46 Test the Hub Connection 48 Test the SRL Seal 48  Table of Contents (cont) Emergency 20 Procedure 49 Install the Emergency Sliplock Adapter 49 Energize the P Seals 51 Test the Seals 52 Emergency 13-3/8 Procedure 53 Install the Compact Spool 53 Install the Emergency Sliplock Adapter 55 Install the Transition Seal 58 Emergency 9-5/8 Procedure 59 Run the 9-5/8 Emergency Casing Hanger 59 Washout the Compact Spool 61 Install the Seal Assembly 62 Testing the Seal Assembly 65 Torque Chart 66 Torque Chart 67  Conductor 20 Casing 13-3/8 Casing 9-5/8 Casing Control line RP020695 2-7/8 Tubing Bill Of Materials