汽车螺旋弹簧离合器的设计演示文档.ppt

Abstract To the internal combustion engine as the driving force in the mechanical transmission car, the clutch is the assembly as an independent existence. Clutch is usually packed in between the engine and transmission, the active part connected with the engine flywheel, driven in part connected with the transmission. For various types of motor vehicles is widely used in friction clutch, in fact, is a kind of rely on their owners, driven in part to friction between the transmission power can separate agencies. The main function of the clutch is cut off and the engine and transmission system to achieve smooth joint, to ensure that a smooth start; in the shift will be separated from the engine and power train to reduce the transmission of shocks between the gear shift; in its work by the larger dynamic load when the transmission system to limit the burden of the maximum torque to prevent the powertrain components of the damage due to overload; effectively reduce the transmission lines of the vibration and noise. The design uses a single car coil spring clutch. The car used clutch friction because of its simple structure, reliability, maintenance convenience, the majority of vehicles currently using this form of clutch. The use of dry-type clutch is because most of the wet clutch is a multi-disc clutch, for the need for greater torque transmission clutch, and the model is not included. The use of coil spring coil spring clutch because the clutch has many advantages: First, the coil spring has nonlinear characteristics, it can be designed to wear when the friction plate, the spring pressure can be maintained almost unchanged, and reduce the separation of the clutch pedal at the time of ability to manipulate light; Secondly, the coil spring on the installation location of the centerline of the clutch shaft is right, so the pressure is not in fact the effects of centrifugal force, stable performance, or balance; In addition, the coil spring itself, and fro