光纤接头的清洁.ppt

JDS UNIPHASE PROPRIETARY INFORMATION WESTOVER CleanBlastTM WESTOVER光纤清洁机 Product Overview Training 产品概况培训 CleanBlast Outline CleanBlast 概况 Contamination污染 Cleaning Methods清洗方法 CleanBlast Overview概况 Portable Systems便携式系统 Bench-top Systems台式系统 Additional Configurations额外配置 Tips Adapters尖端适配器 Applications应用 Performance Tests性能测试 Financial Benefits经济受益 Summary总结 Introduction to Fiber Connection光纤连接的介绍 Basic Terms Concepts 一般条件概念 Fiber Connection光纤连接 Introduction to Contamination污染介绍 Basic Terms Concepts 一般条件概念 Contamination Overview污染概况 Particles trapped between mated connectors prevent the transmission of light, causing back reflection, insertion loss and even equipment damage.被卡在配对连接器间的微粒妨碍光的传输,导致回波反射,插入损耗,甚至设备损坏 A single 1 micron particle on the core of a SM connector can created massive signal degradation.SM连接器中心上1微米的微粒可导致大量信号质量降低. Dirt is Everywhere!到处都是灰尘 Airborne, hands, clothing, bulkhead adapter, dust caps, test equipment, etc.空气传播,手,衣服,阴性适配器,防尘盖,测试仪器等. The average dust particle is 2–5μ, which is not visible to the human eye.平均灰尘微粒2–5μ, 人的肉眼看不到 A single spec of dust can be a major problem when embedded on or near the fiber core.当灰尘深埋或在光纤中芯的旁边, 一个简单的规格都可能会是一个大问题 Even a brand new connector can be dirty. Dust caps protect the fiber end-face, but can also be a source of contamination.即使是全新的连接器也可能是脏的.虽然防尘帽保护光纤端面,但也可能是一个污染源 Types of Contamination污染类型 Cleaning Methods清洗方法 Basic Terms Concepts 基本条件概念 Contamination Categories污染类型 LOOSE松动 Most contamination comes from dry particles that have fallen onto the end-face or have been “placed” there when handling.大部分的污染来自落在端面上干燥的微粒或处理过程中落在那里. Common Cleaning Methods一般清洗方法 Cleaning With Swab用棉签棒清洗 CleanBlastTM光纤清洁机 Basic Terms Concepts 一般条件概念 CleanBlast Overview CleanBlast 概况 What It Does它做什么 How It Works它怎么工作 Portable CleanBlast System便携式清洗系统 Bench-top CleanBlast System台式CleanBlast系统 Other System Configurations其他系统配置 Cleaning Tips Adapters清洗尖端适配器 Basic Terms Concepts 基本条件概念 Cleaning Tips Adapters清洗尖端适配器 Tips