主机遥控数据和试验程序Chief C20 TEST PROCEDURE.doc

DataChief C20 FT / FAT Procedure KG8/KG9 Department/Author: Approved by: Operations/Bente Lise Mel?s (s) Bj?rn Marthinsen (s) 2001 KMSS AS Ship Automation All rights reserved No part of this work covered by the copyright hereon may be reproduced or otherwise copied without prior permission from KMSS AS Ship Automation  DOCUMENT STATUS Issue No. Date/Year Inc. by Issue No. Date/Year Inc. by A 10-Jun-99 ASJ B 1-Jul-99 ASJ C 1-Jul-99 ASJ D 1-Apr-01 ?E/BLM CHANGES IN DOCUMENT Issue ECO Paragraph Paragraph Heading/ No. No. No. Description of Change A First issue. B AOE-005210 The document has been updated according to new functions. C AOE-005216 Updated on request from classification society. D AOE-006905 LOS added to the procedure. Year 2000 test removed. General corrections  TABLE OF CONTENTS Section Page 1. Introduction 1 2. General test 2 2.1 Mains Power Failure 2 2.2 Date Change in Application 2 3. Functional Test of the OCP 3 3.1 Test Purpose and Preparation 3 3.2 Lamp Test / Alarm Test 4 3.3 Mimic Display 5 4. Test of Alarm System 6 4.1 Test of On/Off Alarm-Channels 6 4.2 Test of Analogue Alarms and Acknowledge 8 4.3 Alarm-Limit/ Time Delay Change 9 4.4 Test of Alarms with Inhibit Function 10 4.5 Test of Combined Alarm and Log Printer 11 5. Test of Responsibility Transfer and Watch calling System 12 5.1.1 Watch Responsibility Transfer from ECR to Bridge. 12 5.2 Alarms 13 5.2.1 Acknowledge 13 5.2.2 Repeat Alarm 14 5.3 Call Duty Engineer 17 5.4 Watch Call During ROS Failure 18 6. Test Of Graphical User Interface 19 7. Test Of Limited Operator Access And Override 21 7.1 Alarm Acknowledge from the ROS on the Bridge or CCR 21 8. Test Of System Failures 22 8.1 Test of Communication Failures 22 8.1.1 Communication Failures on the CAN Bus 22 8.1.2 Communication Failures in Redundant CAN Bus 23 8.1.3 OCP Communi