驾驶室值班报警BWMS-C20.doc

DataChief Bridge Watch MonitoringType BWMS-C20FAT/ATOS Procedure KG8/KG9 Department/Author: Approved by: System Test / Vibeke Fugle Mailund Bente Lise Mel?s 2013 KONGSBERG MARITIME AS All rights reserved No part of this work covered by the copyright hereon may be reproduced or otherwise copied without prior permission from KONGSBERG MARITIME AS DOCUMENT STATUS Issue No. Date/Year Inc. by Issue No. Date/Year Inc. by A 20-Oct-03 TS B 22-Jan-04 EHAA C 30-Sep-04 TS D 20-Dec-04 VFM CHANGES IN DOCUMENT Issue ECO Paragraph Paragraph Heading/ No. No. No. Description of Change A First issue. B AOE-009190 Updated acceptance certificate, replaced BWM doc.no. with DC C20 doc.no. C AOE-010452 Update D AOE-010885 Added abbreviations. Updated chapter 1. Rewritten chapter 2. Added Backup power fail alarm in 3.6. Added appendix System Specifications and Serial Numbers. TABLE OF CONTENTS 1 Introduction 4 2 Functional Description 5 2.1 Equipment included 5 2.2 Interval checking system 5 2.3 Navigation warning and alarm system 5 3 Test procedure 6 3.1 Power Up Checking 6 3.2 System Failure Alarm Can Loop 6 3.3 Password When Timer On/Off 6 3.4 Auto Start Time 7 3.5 Change Off Time t1 7 3.6 Backup power fail Alarm with External Reset 7 3.7 Interval Check With External Reset 8 3.8 External Reset 8 3.9 Call Backup Navigator 9 3.10 No Backup Navigator Selected. 9 4 APPENDIX I System specifications 10 5 APPENDIX II Serial numbers 11 6 APPENDIX III Acceptance certificate 12  List of Abbreviations ACK = Acknowledge BWM = Bridge Watch Monitoring CAN = Controller Area Network DPU = Distributed Process Unit ICS = Interval Check System K1 = Captains Quarter K2 = Public Room K3 = Navigator Cabin K4 = Navigator Cabin K5 = Navigator Cabin K6 = Navigator Cabin K7 = Bridge Buzzer K8 = External Pre warning K9 = External Sound Off MOS